The STEELMAN 1520 1/4 Inch 90-Degree Angle Pneumatic Die Grinder combines hardened spiral bevel gears with ball bearing construction to produce a smooth operating and easy to use hand held power tool. It features a powerful 0.5 HP motor that peaks with a 22,000 RPM free run speed and is controlled with a safety locking tease-trigger for precision control as well as protection from accidental startups. The one-piece body shell design simplifies maintenance by eliminating leak points and connections that can cause leaks over time. The 1/4-inch collet is set at a 90-degree angle to the body and is designed to accept a wide range of heads and bits to help you get the job done right with quick-swappable convenience. Highly efficient, the motor runs on a mere 4 cubic feet of compressed air at 90 PSI. The air inlet on the tool's base is threaded to accept a conventional 1/4-inch NPT fitting or quick disconnect coupler. Tool measures 6.5-inches long and weighs 1.5-pounds letting it get into tight spaces when needed all while not tiring out operators like heavier designs.

• IDEAL GRINDING TOOL - Ideal tool for when you need to remove rust and finishing steel and non-metal surfaces
• SAFETY TRIGGER LOCK - Safety trigger lock secures against accidental startup without impairing easy use
• 1/4-INCH COLLET - 1/4-Inch collet accepts a wide range of heads for a variety of uses
• FREE SPEED - Free running speed maximum is 22,000 RPM
• VARIABLE SPEED THROTTLE - Variable speed throttle for positive speed control via lever style tease trigger
• REDUCED MAINTENANCE - Single piece body shell design minimizes wear points and simplifies maintenance
• LOW AIR DEMAND - Operates on a mere 4 cubic feet per minute of 90 PSI compressed air

PRODUCT SPECIFICATIONS


Material:	Metal
Overall Dimensions:	6.00 in. L x 3.25 in. W x 1.34 in. H
Item Weight (lb.):	1.15
Warranty:	1 Year Limited Warranty
Country of Origin:	Taiwan

Share additional product information such as usage instructions, sizing guides, etc.